Which Espruino?

Espruino comes in six flavours, all of which:

 

 

Puck.js

  • Bluetooth Low Energy
  • Software programmable NFC tag
  • Red, Green and Blue LEDs, and General purpose button
  • Infrared transmitter
  • Magnetometer, thermometer, light and battery sensors
  • v2: Accelerometer and Magnetometer
  • FET for high-power outputs
  • 36mm dia, 12.5mm thick case (64mm x 62mm x 16mm in cardboard box)
  • Tough Silicone cover and ABS plastic rear with lanyard mount
  • 64MHz Cortex M4 processor
  • 64kB RAM, 512kB Flash
  • 9 GPIO pins (7 on 0.1" pitch)
  • Voltage range: 2.0v - 3.6v
  • See more technical information

Espruino Bangle.js 2

  • 176x176 3 bit color always-on LCD
  • Bluetooth Low Energy
  • GPS, Heart Rate, Accelerometer, Magnetometer, Altimeter
  • Vibration motor
  • IP67 Water resistant
  • 36mm x 43mm x 12mm watch body, with standard 20mm watch straps
  • 64MHz Cortex M4 processor
  • 256kB RAM, 1024kB on-chip flash, 8MB External flash
  • 200mAh LiPo battery, USB charge cable
  • See more technical information

 

Espruino Pixl.js

  • 128x64 backlit LCD display
  • Bluetooth Low Energy
  • Arduino footprint (20x GPIO)
  • Software programmable NFC tag
  • 60mm x 53mm x 15mm, 4x 3mm mounting holes
  • 64MHz Cortex M4 processor
  • 64kB RAM, 512kB Flash
  • Power from CR2032, USB, or Arduino (2.0v - 16v, 0.3mA at idle)
  • See more technical information

Espruino Jolt.js

  • 8x high power 1A H-bridge outputs
  • 4x Qwiic/Stemma connectors
  • Bluetooth Low Energy
  • 2.7v to 18v input range, ultra low power idle
  • 40mm x 40mm x 12mm
  • with protective silicone case
  • 64MHz Cortex M4 processor
  • 256kB RAM, 1024kB Flash
  • See more technical information

 

Espruino Pico

  • 33mm x 15mm (1.3in x 0.6in)
  • On-board Type A USB
  • Red and Green LEDs, General purpose Button
  • 84Mhz ARM Cortex M4 processor
  • 384kB Flash, 96kB RAM
  • 22 GPIO pins: 21 PWM, 9 ADC, 2 USARTs, 3 SPI, 3 I2C
  • CE and RoHS certified
  • Available with or without soldered pins
  • Voltage range: 3.5v - 16v
  • See more technical information

MDBT42Q

  • Bluetooth Low Energy
  • Red and Green LED, and General purpose button
  • 18mm x 28mm x 4mm thick
  • 64MHz Cortex M4 processor
  • 64kB RAM, 512kB Flash
  • 22 GPIO pins (incl 7 analog)
  • Voltage range: 2.0v - 16v @ 20uA average
  • Available with on-board or external aerial
  • Bare pre-programmed module also available
  • See more technical information

 

Original Espruino

  • 54mm x 41mm (2.2in x 1.6in - half business card)
  • Micro USB, Micro SD card, JST PHR-2 battery connector
  • RGB LEDs, Reset + General purpose Buttons
  • 72Mhz ARM Cortex M3 processor
  • 256kB Flash, 48kB RAM
  • 44 GPIO pins: 26 PWM, 16 ADC, 5 USARTs, 3 SPI, 2 I2C and 2 DACs
  • CE and RoHS certified
  • Prototype area
  • Voltage range: 3.5v - 16v
  • See more technical information

 

 

 

Distributors

Espruino is available from the following distributors (click to go directly to the product):

Original Pico
Unpinned
Pico
Pinned
Puck.js Pixl.js Jolt.js MDBT42Q Bangle.js Accessories
Buy Direct (UK 🇬🇧)
Espruino Shop

Prices in USD, EUR or GBP,
devices are shipped from the UK

²
USA 🇺🇸
Adafruit ²
UK/EUROPE (UK 🇬🇧)
Pimoroni ²
The Pi Hut ²
UK/EUROPE (GERMANY 🇩🇪)
BerryBase ²
UK/EUROPE (FRANCE 🇫🇷)
Lextronic
GO TRONIC ²
UK/EUROPE (ITALY 🇮🇹)
smartme.IO
UKRAINE 🇺🇦
Mikronika
CHINA 🇨🇳
Seeed Studio
Bulk Purchase Discounts

If you want to order 20 or more boards (or become a distributor), please order from our online shop or contact us directly.

We offer large discounts for bulk purchases. Prices excluding Postage and Packing are:

Original Pico
Unpinned
Pico
Pinned
Puck.js (lite) Pixl.js Jolt.js MDBT42Q Bangle.js
>= 20 (ex VAT) £16.67 £13.33 £13.33 £23 (£19) £24.00 £30.00 £13.33 £52.00
>= 50 (ex VAT) £15.83 £12.66 £12.66 £22 (£18) £22.80 £28.00 £12.66 £51.00
>= 100 (ex VAT) £15.00 £12.00 £12.00 £21 (£17) £21.60 £26.00 £12.00 £49.00
>= 1000 Please contact us

 

Note: We have had to raise the price of Puck.js slightly, however we have released a Puck.js Lite, which is cheaper than the original Puck.js